Report Options Files TriStar II 3020
5-34 302-42828-01 - Dec 2012
BET (or Langmuir)
Transform plot
Select to generate a traditional BET (Langmuir) surface area plot used to
determine monolayer volume and BET C constant.
• X-axis - linear X-axes begin at zero. The X-axis field shows the
relative pressure for BET and show absolute pressure for Langmuir.
• Y-axis - Y-axes begin at zero. The Y-axis field shows BET (Langmuir)
transformation.
BET (or Langmuir)
Isotherm plot
Select to use the BET (Langmuir) monolayer volume and constant to
produce an isotherm.
Uses the BET (Langmuir) monolayer volume and constant to produce an
isotherm.
• X-axis - linear X-axes begin at zero. The X-axis field shows the
relative pressure for BET and show absolute pressure for Langmuir.
• Y-axis - Y-axes begin at zero. The Y-axis field shows the quantity of
gas adsorbed.
Tabular Report
checkbox
Select to have a report of the pressure points generated.
Overlay Samples
checkbox
Select to overlay sample files.
Cancel button
Close button
From / To text boxes
OK button
Preview button
Save button
Table buttons
Refer to Common Fields and Buttons - File Menu Options, page 5-1.
Field or Button Description (continued)
To Next Page
Loading...
