TriStar II 3020 QuickStart Analysis
302-42828-01 - Dec 2012 6-5
QuickStart Analysis
Unit [n] > QuickStart Analysis
Use to analyze up to three samples of the same type using the same analysis conditions, adsorptive
properties, and report options. The QuickStart Analysis option automatically creates a sample infor-
mation file for each port and assigns the default parameters. Edit the parameters of a file using the Edit
button or select another file using the Browse button.
Additional analyses can be scheduled by clicking Next after the completion of the first set of analyses.
The Next button appears after the first series of analyses is complete. Samples cannot be removed or
added to ports until the full set of analyses has completed.
QuickStart Analysis fields and buttons are identical to the Sample Analysis, page 6-2 with the fol-
lowing exception:
Browse button
Cancel button
Edit button
OK button
Refer to Common Fields and Buttons - Unit Menu Options, page 6-2.
Field or Button Description
Sample tube button Click the dropdown arrow to select a sample tube file. This option is
applicable only if the calculated method for measuring free space is
selected for Analysis Conditions.
Field or Button Description (continued)
To Next Page
Loading...
