TriStar II 3020 Generating Graph Overlays
302-42828-01 - Dec 2012 3-37
Generating Graph Overlays
Use the graph overlay function to compare multiple graph options. Graphical lines are differentiated
by the use of varying colored symbols outlined on a legend. Overlays may be generated in two ways:
• Multiple Sample Overlays - overlay up to eight plots of the same type with that of the current plot.
• Multiple Graph Overlays - overlay two different types of plots from one sample. This type of
overlay is available only for:
– BJH Adsorption/Desorption
– DFT Pore Size/Surface Energy
– Dollimore-Heal Adsorption/Desorption
– Horvath-Kawazoe
– M-P Method
Only the Advanced format can be used to generate overlays. Select Options > Options Presentation >
Advanced to access the Advanced format or select Advanced from the dropdown list at the bottom of
the screen.
Multiple Sample Overlays
To overlay the same type of graph on multiple samples:
1. Go to File > Open > Sample Information [file].
2. Click the Report Options tab at the top of the screen. Reference the following table for
instructions for the selected report.
Highlight the report to
overlay, then click Edit.
To Next Page
Loading...
