Micromeritics TriStar II 3020 - Page 70

Generating Graph Overlays TriStar II 3020
3-38 302-42828-01 - Dec 2012
If overlaying this type of
report...
Then...
•Isotherm
a.) In the Selected Reports list box, highlight Isotherm and
click Edit.
b.) On the Isotherm Report Options window, select a plot in
the Selected Reports group box then click the Options
button to the right of the selected plot.
c.) On the Plot Options window, select the Overlay samples
checkbox and verify other fields. Click OK to save and
close the window.
d.) Click OK again on the Isotherm Report Options window
to return to the Report Options tab.
e.) Continue with Step 3.
• BET Surface Area
• Langmuir Surface Area
• Freundlich
•Temkin
• t-Plot
•Alpha-S
• f-Ratio
a.) In the Selected Reports list box, highlight one of the report
options shown on the left and click Edit.
b.) On the Report Options window, select the Overlay
samples checkbox for the Transform plot and/or the
Isotherm plot. Verify other fields. Click OK to return to the
Report Options tab.
c.) Continue with Step 3.
•BJH Adsorption
• BJH Desorption
• Dollimore-Heal Adsorption
• Dollimore-Heal Desorption
•MP-Method
a.) In the Selected Reports list box, highlight one of the report
options shown on the left and click Edit.
b.) Select the report variable from the Select Reports group
box and click Edit.
c.) Click the dropdown arrow on the Overlay field and select
the Samples option. Verify other fields. Click OK to return
to the Report Options window.
d.) Click OK again to return to the Report Options tab.
e.) Continue with Step 3.