Report Options Files TriStar II 3020
5-36 302-42828-01 - Dec 2012
Temkin Isotherm Report Options
The Temkin isotherm is used to model adsorption data where the heat of adsorption drops linearly with
increasing coverage. In the Selected Reports list box, highlight Temkin, then click Edit.
Freundlich Isotherm
plot checkbox
Plots the absolute pressure vs quantity adsorbed. Shows best fit line.
• X-axis - linear X-axes begin at zero. The X-axis field shows the
absolute pressure.
• Y-axis - Y-axes begin at zero. The Y-axis field shows the quantity of
gas adsorbed.
Cancel button
From / To text boxes
OK button
Refer to Common Fields and Buttons - File Menu Options, page 5-1.
Field or Button Description
Specify monolayer
capacity checkbox
Refer to Freundlich Report Options, page 5-35.
Specify differential
heat of adsorption
checkbox
Select and enter the differential heat of adsorption at zero surface
coverage. This allows inclusion of all Temkin constants.
Field or Button Description (continued)
To Next Page
Loading...
