Report Options Files TriStar II 3020
5-28 302-42828-01 - Dec 2012
Summary Report
The Summary Report provides a condensed listing of selected data results. In the Selected Reports
list box, highlight Summary, then click Edit. Select the data types to include in the Summary report.
In the Pore Volume column, if Adsorption total or Desorption total is selected, the P/Po
field is
enabled. Enter the relative pressure used to calculate the total pore volume.
If Use calculation assignments is not selected on the Collected Data window, the isotherm is interpo-
lated to the value in the P/Po
fields and the point is used for the total pore volume calculation.
Otherwise, the point selected with calculation assignment is used. Pass/Fail criteria can be specified
for up to four parameters.
Field or Button Description
Select All /
Deselect All buttons
Selects (or deselects) all choices.
Used to enable the first Pass/Fail item. Until the Summary Report is
selected, S A Single-point BET will be displayed by default. When a
checkbox is selected, click the Pass/Fail button and select criteria options
for pass/fail options.
• S A: Single-point BET checkbox - select to enable the Pass/Fail [n]
button in the Item [n] group box.
To Next Page
Loading...
