TriStar II 3020 Show Status
302-42828-01 - Dec 2012 6-13
Show Status
Unit [n] > Show Status
Use to show only the status window of the analyzer.
The buttons across the bottom of the window are described in Enable Manual Control, page 6-8.
The status window shows the current status for each port. Use this option if:
• there is an automatic operation in progress and the sample file needs to be edited.
• there are multiple units attached to the computer. Select Show Status on each unit menu and have
the status for all units displayed at one time.
If multiple instruments are attached to the computer, the status window for each
instrument is displayed in a different color.
To Next Page
Loading...
