Micromeritics TriStar II 3020 - Enable Manual Control

Enable Manual Control TriStar II 3020
6-8 302-42828-01 - Dec 2012
Enable Manual Control
Unit [n] > Enable Manual Control
Use to enable the manual control of certain system valves and elevator components. When this option
is enabled, a checkmark appears to the left of the menu item. Enable this option by selecting Enable
Manual Control on the menu.
If the following instrument schematic is not immediately visible, select Unit [n] > Show Instrument
Schematic.+
Field or Button Description
Open Sample File
button
Click to open the Open Sample Information File window.
Start Report button Click to open the Start Report window.
Start Analysis button Click to display the Analysis window.
QuickStart Analysis
button
Click to display the QuickStart Analysis window.
SPC Control Chart
button
Click to display the Control Chart window.