Report Options Files TriStar II 3020
5-46 302-42828-01 - Dec 2012
Tabular Report Options
Highlight BJH Tabular Report in the Selected Reports list box and click Edit to specify the method
of data reduction.
Pressure Range button Click to enter minimum and maximum relative pressures.
If Use calculation assignments is not selected on the Analysis
Conditions window, all of the non-outlier points of the collected data
within the specified range are used for calculating the data for this report.
If Use calculation assignments is selected, collected data points assigned
to this report type are used.
Cancel button
Edit button
OK button
Refer to Common Fields and Buttons - File Menu Options, page 5-1.
Field or Button Description
Fixed pore size table Select to specify exact pore sizes for volume or area data.
Click the Table button to modify the fixed pore size table. Reference
Table and Columns below for information on the use of these buttons.
Collected points Select to include all relative pressure points collected. Reference the
Columns button referenced below.
Field or Button Description (continued)
To Next Page
Loading...
