TriStar II 3020 Generating Reports
302-42828-01 - Dec 2012 3-29
Generating Reports
Reports > Start Report > [file] (or use the F8 keyboard shortcut)
1. Select the report in the Name column. The selected report name appears in the File name text
box. To select more than one file, hold down the Ctrl key on the keyboard while selecting the
files. Click Open.
2. Select the report destination in the Report Settings window and click OK. Refer to Printing
Files, page 3-31.
3. If only one file was selected in step 1, the Select Reports window displays. Verify the reports to
generate and click OK. If multiple files were selected, this window does not display.
To Next Page
Loading...
