Micromeritics TriStar II 3020 - Opening Sample Information Files; Opening Files with a Status of Complete, Analyzing, or Entered

Defining Sample Information Files TriStar II 3020
3-8 302-42828-01 - Dec 2012
4. In the Sample field, enter a sample description.
5. In the Mass group box, choose whether to enter mass manually or to have the system
automatically calculate mass. Enter a value for sample mass and/or density. Refer to Sample
Information Files, page 5-8.
6. Click the dropdown arrows to select default parameter files for Degas conditions, Analysis
conditions, Adsorptive properties, Report options and Sample tube.
7. Click Save, then click Close.
Opening Sample Information Files
Opening Files with a Status of Complete, Analyzing, or Entered
1. Select File > Open > Sample Information.
2. To sort the file list by status, click the Mic Status column he
ader. Select a file with a status of
Complete, Analyzing, or Entered and click Open (or double click the file name).
3. Save the changes in the sample information file by clicking the Save button.
If there is an existing sample file containing the values to be used in the current sample
file, click Replace All to choose the file and copy the values into the current file.
Be advised when working with an existing file that a copy of the file be used rather
t
han the original.