Micromeritics TriStar II 3020 - Diagnostics

Diagnostics TriStar II 3020
6-16 302-42828-01 - Dec 2012
Diagnostics
Unit [n] > Diagnostics
Use to clean and verify gas lines when connecting or changing a gas. Refer to Cleaning and Verifying
the Gas Line, page 9-21 for detailed instructions. Also used to perform diagnostic tests requested by a
service representative.
This option is typically used and/or requested by a service representative. These tests create and save
files to the TriStar II 3020\Service\USERDIAG directory. The service representative may request an
emailed or faxed copy of the file for diagnostic purposes.
Gas Selections

group box
In the text boxes, enter the mnemonics for the analysis gases attached to
inlet valves 9, 8 and 14. Valve 7 is reserved for Helium (used for free space
measurement).
Servo Valve

group box
Displays the last calibration date of the servo valve.
Options Indicates if the Krypton option is installed.
Calibration

group boxes
Displays calibration information for their respective components.
Field or Button Description (continued)