TriStar II 3020 Introduction
302-42828-01 - Dec 2012 5-1
5. FILE MENU
Introduction
This chapter contains information specific to the File menu options used to manage sample and param-
eter files. This chapter provides details of File menu options, commonly used functions and buttons,
and field descriptions.
Common Fields and Buttons - File Menu Options
The following fields and buttons are common to many of the File Menu windows. Field and button
descriptions not listed below are found in their respective sections
.
Common field and button descriptions are listed in a Common table at the beginning
of their respective chapters. Field and button descriptions not listed in the Common
table are listed in their appropriate heading.
Refer to the Appendix section of this manual for further details on report calculations
(
CALCULATIONS, page C-1), free space correction (FREE SPACE CORRECTION,
page E-1
), and DFT models (DFT MODELS, page F-1).
Field or Button Description
Autoscale checkbox When working with report parameters screens, when enabled, allows the X-
and Y-axes to be scaled automatically.
Axis Range When working with report parameters screens, the From / To fields are
enabled when Autoscale options are not selected. Enter the starting and
ending values for the X- and/or Y-axes.
Menu bar
To Next Page
Loading...
