TriStar II 3020 Report Options Files
302-42828-01 - Dec 2012 5-43
Field or Button Description
Reference isotherm Click Browse to select a sample file to use as a reference for the isotherm.
Select a file containing an isotherm measured from a non-porous sample of
the same material as the current sample. When the referenced file is
selected, the file name appears to the left of the Browse button.
f-Plot checkbox Select to generate a normalized isotherm.
• X-axis - the X-axis field is dimensionless in units of alpha-s ratio.
• Y-axis - the Y-axis field shows the quantity of gas adsorbed.
Relative pressure
range text boxes
Enter a pressure range when calculations assignments are not used.
Tabular Report
checkbox
Overlay Samples
checkbox
Refer to BET/Langmuir Surface Area Report Options, page 5-32.
Browse button
Cancel button
From / To text boxes
OK button
Refer to Common Fields and Buttons - File Menu Options, page 5-1.
To Next Page
Loading...
