TriStar II 3020 Sample Analysis
302-42828-01 - Dec 2012 6-3
Field or Button Description
View dropdown list • Operation - select to display the current mode of operation.
• Instrument Log - select to display recent analyses, calibrations, errors
or messages. Refer to Show Instrument Log, page 6-14.
• Instrument Schematic - select to display a schematic of the analyzer
system. Refer to Show Instrument Schematic, page 6-12.
Close Valves button Click to close all valves on the unit.
Clear button Click to clear all fields for this port.
Density / Mass /
Sample + tube /
Tube text boxes
Enter default values for the sample’s mass and density. Both of these
values may be edited at the time of analysis. Refer to Sample Information
Files, page 5-8.
p
o
text box
Enabled if Entered is selected for the Po measurement for at least one file.
Bath temperature
text box
Enter the temperature for the analysis bath.
Port Activity
window
Status window
To Next Page
Loading...
