Instrument Components and Connectors TriStar II 3020
2-2 302-42828-01 - Dec 2012
Sample Compartment
Component Description
Sample ports For installing up to three sample tubes.
Po tube For measuring the saturation pressure.
Diagram Diagram of port numbers and locations.
Elevator Allows placement of the Dewar around the sample and Po tubes. The
elevator raises automatically when the analysis is started and lowers
automatically upon completion. During analysis, the elevator lowers after
the free-space measurement to allow evacuation, then raises and continues
the analysis.
Diagram of port locations
Three sample ports
Saturation pressure (Po) tube
Elevator
To Next Page
Loading...
