TriStar II 3020
10-4 302-42828-01 - Dec 2012
302-25821-01 Hanging Filler Rod, for 3/8 in. sample tube
302-25821-02 Hanging Filler Rod, for 1/2 in. sample tube
302-33601-00 Sample Tube Kit, 1/4 in.; includes six each sample tubes, O-rings, and plastic
caps; three each isothermal jackets, filler rods, and ferrules; and a Dewar cover
302 -33602-00 Sample Tube Kit, 3/8 in.; includes six each sample tubes, O-rings, and stoppers;
three each isothermal jackets, filler rods, and ferrules; one sample tube brush;
and a Dewar cover
302 -33603-00 Sample Tube Kit, 1/2 in.; includes six each sample tubes, O-rings, and stoppers;
three each isothermal jackets, filler rods, and ferrules; one sample tube brush;
and a Dewar cover
302-33607-00 Seal Frit Kit; includes three seal frits, nine openers, three filler rods, installation
tool and instructions, for 1/2 in. sample tube
302-61001-00 Sample Tube, 1/4 in. stem OD; for analyzing powdered samples where free
space management (with a filler rod inserted) is critical
302-61001-01 Sample Tube, 3/8 in. stem OD; for analyzing any type of sample
302-61001-02 Sample Tube, 1/2 in. stem OD; for analyzing larger pieces of granular or
pelleted samples
302-61002-00 Sample Tube, 1/4 in. stem OD, flat bottom
302-61002-01 Sample Tube, 3/8 in. stem OD, flat bottom
302-61002-02 Sample Tube, 1/2 in. stem OD, flat bottom
302-61005-02 Filler Rod, for 1/2 in. sample tube when using the Seal Frit
Software and Manuals
202-20827-00 MicroActive software
202-33027-00 MicroActive; includes software and operator’s manual. This program allows
you to generate and manipulate data on a computer other than the one
controlling the analyzer or to compare data from another instrument.
202-42827-00 MicroActive Operator’s manual
Part Number Item and Description (continued)
To Next Page
Loading...
