Micromeritics TriStar II 3020 - Page 349

MP
DAVER
MPV
TOT
MPS
TOT
----------------------
10
6–
 m
3
/cm 10
10
Å/m=
TriStar II 3020 Appendix C
302-42828-01 - Dec 2012 C-41
g.) BJH Cumulative Desorption
h.) Adsorption Total Pore Volume
i.) Desorption Total Pore Volume
j.) t-Plot Micropore Pore Volume
See t-Plot calculations
k.) Dubinin-Radushkevich Micropore Surface Area
See Dubinin-Radushkevich calculations
l.) Dubinin-Radushkevich Monolayer Capacity
See Dubinin-Radushkevich calculations
m.) Dubinin-Astakhov Micropore Surface Area
See Dubinin-Astakhov calculations
n.) Dubinin-Astakhov Micropore Volume
See Dubinin-Astakhov calculations
o.) MP-Method Cumulative Surface Area of Pores
MPS
TOT
= S
CUM
I
, (see MP-method Calculations) for the last collected data point used in the
MP-method Calculations, and the range of hydraulic pore radii over which the cumulative
surface area was computed.
p.) MP-Method Cumulative Pore Volume of Pores
MPV
TOT
= V
CUM
I
, (see MP-method calculations) for the last collected data point used in the
MP-method calculations, and the range of hydraulic pore radii over which the cumulative
pore volume was computed.
q.) Average Pore Hydraulic Radius (A)