Specifying Sample Defaults TriStar II 3020
3-4 302-42828-01 - Dec 2012
2. Go to Options > Sample Defaults.
3. In the Sequence Number alpha/numeric text box, specify a default file name string. The
Sequence Number field must contain a minimum of three (3) numbers. This number is
incrementally sequenced and displays in the File name text box in the File > Open > Sample
Information window.
4. The text box to the right of the Sample field is used to enter a format for the sample identification.
Include the $ symbol to automatically include the Sequence Number field text as part of the
sample identification.
5. In the Mass group box, choose whether to enter mass manually or to have the system
automatically calculate mass. Enter a value for sample mass and/or density. Refer to Sample
Information Files, page 5-8.
6. Select the dropdown arrow to the right of the Sample Tube, Degas conditions, Analysis
conditions, Adsorptive properties, and Report options fields to select default parameter files that
were saved while in Advanced format and saved to the directory specified in Options >
Parameter Files Directory.
7. Click Save, then click Close.
The label for the Sample field can be modified by overwriting the default label.
To Next Page
Loading...
