2 ABOUT THE SMART VACPREP SOFTWARE
If a software update is required for the analyzer to support the Smart VacPrep, the software can be
downloaded from the internet at this location:
http://www.micromeritics.com/Smart-VacPrep-Software.aspx
The degasser software is installed as a part of the analyzer installation. During installation, an
IPaddress will be assigned to the unit allowing the unit to connect automatically during startup. Up to
three additional degasser units can be installed.
Menu options for the Smart VacPrep are provided on the SmartVacPrep menu.
ADD OR REMOVE A SMART VACPREP
A Smart VacPrep unit must be removed from one application before it can be added to another
application if they are running on the same subnet.
2 About the Smart VacPrep Software
Smart VacPrep Operator Manual — 067-42800-01
Dec 2013
2 - 1
To Next Page
Loading...
