the bridge will start functioning normally
garbage-collection-interval ( time ; default: 4s ) - how often to drop old (expired) host entries in
the bridge database. The garbage collection process expurges the entries older than defined by the
ageing-time property
hello-time ( time ; default: 2s ) - how often send hello packets to other bridges
mac-address ( read-only: MAC address ) - MAC address for the interface
max-message-age ( time ; default: 20s ) - how long to remember Hello messages received from
other bridges
mtu ( integer ; default: 1500 ) - Maximum Transmission Unit
name ( name ; default: bridgeN ) - a descriptive name of the bridge interface
priority ( integer : 0 ..65535 ; default: 32768 ) - bridge interface priority. The priority argument is
used by Spanning Tree Protocol to determine, which port remains enabled if at least two ports form
a loop
stp ( no | yes ; default: no ) - whether to enable the Spanning Tree Protocol. Bridging loops will
only be prevented if this property is turned on
Example
To add and enable a bridge interface that will forward all the protocols:
[admin@MikroTik] interface bridge> add; print
Flags: X - disabled, R - running
0 R name="bridge1" mtu=1500 arp=enabled mac-address=61:64:64:72:65:73 stp=no
priority=32768 ageing-time=5m forward-delay=15s
garbage-collection-interval=4s hello-time=2s max-message-age=20s
[admin@MikroTik] interface bridge> enable 0
Port Settings
Home menu level: /interface bridge port
Description
The submenu is used to enslave interfaces in a particular bridge interface.
Property Description
bridge ( name ; default: none ) - the bridge interface the respective interface is grouped in
• none - the interface is not grouped in any bridge
interface ( read-only: name ) - interface name, which is to be included in a bridge
path-cost ( integer : 0 ..65535 ; default: 10 ) - path cost to the interface, used by STP to determine
the 'best' path
priority ( integer : 0 ..255 ; default: 128 ) - interface priority compared to other interfaces, which
are destined to the same network
Notes
Starting from version 2.9.9, the ports in this lists should be added, not set, see the following
Page 159 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
To Next Page
Loading...
General