time ( time ) - time in format "HH:MM:SS"
time-zone ( text ) - UTC timezone in format "+HH:MM" or "-HH:MM"
Notes
It is recommended that you reboot the router after time change to obviate the possible errors in time
measurments and logging.
Date and time settings become permanent and effect BIOS settings.
If NTP update gives time shifted by 1 hour, although the time zone is set correctly, you may want to
adjust the DST setting in /system clock dst menu.
Example
To view the current date and time settings:
[admin@Local] system clock> print
time: 08:26:37
date: nov/18/2004
time-zone: +00:00
dst-active: no
[admin@Local] system clock>
To set the system date and time:
[admin@Local] system clock> set date=nov/22/2022 time=11:10:21 time-zone=+0
[admin@Local] system clock> print
time: 11:10:25
date: nov/22/2022
time-zone: +00:00
dst-active: no
[admin@Local] system clock>
System Clock DST adjustment
Home menu level: /system clock dst
Description
In most countries, a Daylight Saving Time regime is activated in spring and deactivated in autumn.
This configuration menu provides DST adjustment facility, to drift the timezone according to your
local legislation and practice.
Property Description
dst-delta ( text ; default: +01:00 ) - UTC timezone drift in format "+HH:MM" or "-HH:MM" to be
added to the local timezone during DST period
dst-end ( date | time ) - date and time when DST ends (when the delta is to be dropped).
dst-start ( date | time ) - date and time when DST begins (when the delta is to be applied).
Example
To make DST zonechange active from mar/27/2005 03:00:00 till oct/30/2005 03:00:00:
Page 580 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
To Next Page
Loading...
General