address ( IP address ) - IP address belongs to the virtual router
broadcast ( IP address ) - broadcasting IP address
interface ( name ; default: default ) - interface, where to put the address on (may be different form
the interface this VRRP instance is running on)
• default - put this address on the interface the given VRRP instane is working on
network ( IP address ) - IP address of the network
virtual-router ( name ) - VRRP router's name the address belongs to
Notes
The virtual IP addresses should be the same for each node of a virtual router.
Example
To add a virtual address of 192.168.1.1/24 to the vr1 VRRP router:
[admin@MikroTik] ip vrrp> address add address=192.168.1.1/24 \
\... virtual-router=vr1
[admin@MikroTik] ip vrrp> address print
Flags: X - disabled, A - active
# ADDRESS NETWORK BROADCAST INSTANCE INTERFACE
0 192.168.1.1/24 192.168.1.0 192.168.1.255 vr1 default
[admin@MikroTik] ip vrrp>
A simple example of VRRP fail over
Description
Page 692 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
To Next Page
Loading...
General