file-name ( text ; default: "" ) - name of the file where to save packets in PCAP format. If
file-name is not defined, packets are not saved into a file
memory-limit ( integer ; default: 1000 ) - how much memory to use (in kilobytes) for sniffed
packets
multiple-channels ( yes | no ; default: no ) - whether to sniff multiple channels or a single channel
• no - wireless sniffer sniffs only one channel in frequency that is configured in /interface
wireless
• yes - sniff in all channels that are listed in the scan-list in /interface wireless
only-headers ( yes | no ; default: no ) - sniff only wireless packet heders
receive-errors ( yes | no ; default: no ) - whether to receive packets with CRC errors
streaming-enabled ( yes | no ; default: no ) - whether to send packets to server in TZSP format
streaming-max-rate ( integer ; default: 0 ) - how many packets per second the router will accept
• 0 - no packet per second limitation
streaming-server ( IP address ; default: 0.0.0.0 ) - streaming server's IP address
Sniffer Sniff
Home menu level: /interface wireless sniffer sniff
Description
Wireless Sniffer Sniffs packets
Property Description
file-over-limit-packets ( read-only: integer ) - how many packets are dropped because of
exceeding file-limit
file-saved-packets ( read-only: integer ) - number of packets saved to file
file-size ( read-only: integer ) - current file size (kB)
memory-over-limit-packets ( read-only: integer ) - number of packets that are dropped because of
exceeding memory-limit
memory-saved-packets ( read-only: integer ) - how many packets are stored in mermory
memory-size ( read-only: integer ) - how much memory is currently used for sniffed packets (kB)
processed-packets ( read-only: integer ) - number of sniffed packets
real-file-limit ( read-only: integer ) - the real file size limit. It is calculated from the beginning of
sniffing to reserve at least 1MB free space on the disk
real-memory-limit ( read-only: integer ) - the real memory size limit. It is calculated from the
beginning of sniffing to reserve at least 1MB of free space in the memory
stream-dropped-packets ( read-only: integer ) - number of packets that are dropped because of
exceeding streaming-max-rate
stream-sent-packets ( read-only: integer ) - number of packets that are sent to the streaming server
Command Description
Page 275 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
To Next Page
Loading...
General