Specifications
Packages required: ppp
License required: level1 (limited to 1 interface) , level3 (limited to 200 interfaces) , level4 (limited
to 200 interfaces) , level5 (limited to 500 interfaces) , level6 (unlimited)
Home menu level: /interface pppoe-server , /interface pppoe-client
Standards and Technologies: PPPoE (RFC 2516)
Hardware usage: PPPoE server may require additional RAM (uses approx. 9KiB (plus extra 10KiB
for packet queue, if data rate limitation is used) for each connection) and CPU power. Maximum of
65535 connections is supported.
Related Documents
• Software Package Management
• IP Addresses and ARP
• RADIUS client
• PPP User AAA
• Log Management
Additional Documents
Links for PPPoE documentation:
• http://www.faqs.org/rfcs/rfc2516.html
PPPoE Clients:
• RASPPPoE for Windows 95, 98, 98SE, ME, NT4, 2000, XP, .NET
http://www.raspppoe.com/
PPPoE Client Setup
Home menu level: /interface pppoe-client
Description
The PPPoE client supports high-speed connections. It is fully compatible with the MikroTik PPPoE
server (access concentrator).
Note for Windows. Some connection instructions may use the form where the "phone number",
such as "MikroTik_AC\mt1", to indicate that "MikroTik_AC" is the access concentrator name and
"mt1" is the service name.
Property Description
ac-name ( text ; default: "" ) - this may be left blank and the client will connect to any access
concentrator that offers the "service" name selected
add-default-route ( yes | no ; default: no ) - whether to add a default route automatically
Page 336 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
To Next Page
Loading...
General