[admin@WiFi] ip ipsec peer>
Remote Peer Statistics
Home menu level: /ip ipsec remote-peers
Description
This submenu provides you with various statistics about remote peers that currently have
established phase 1 connections with this router. Note that if peer doesn't show up here, it doesn't
mean that no IPsec traffic is being exchanged with it. For example, manually configured SAs will
not show up here.
Property Description
estabilished ( read-only: text ) - shows date and time when phase 1 was established with the peer
local-address ( read-only: IP address ) - local ISAKMP SA address
ph2-active ( read-only: integer ) - how many phase 2 negotiations with this peer are currently
taking place
ph2-total ( read-only: integer ) - how many phase 2 negotiations with this peer took place
remote-address ( read-only: IP address ) - peer's IP address
side ( multiple choice, read-only: initiator | responder ) - shows which side initiated the connection
• initiator - phase 1 negotiation was started by this router
• responder - phase 1 negotiation was started by peer
state ( read-only: text ) - state of phase 1 negotiation with the peer
• estabilished - normal working state
Example
To see currently estabilished SAs:
[admin@WiFi] ip ipsec> remote-peers print
0 local-address=10.0.0.148 remote-address=10.0.0.147 state=established
side=initiator established=jan/25/2003 03:34:45 ph2-active=0 ph2-total=1
[admin@WiFi] ip ipsec>
Installed SAs
Home menu level: /ip ipsec installed-sa
Description
This facility provides information about installed security associations including the keys
Property Description
add-lifetime ( read-only: time ) - soft/hard expiration time counted from installation of SA
Page 310 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
To Next Page
Loading...
General