Configuration menus
• /ip hotspot - HotSpot servers on particular interfaces (one server per interface). HotSpot server
must be added in this menu in order for HotSpot system to work on an interface
• /ip hotspot profile - HotSpot server profiles. Settings, which affect login procedure for
HotSpot clients are configured here. More than one HotSpot servers may use the same profile
• /ip hotspot host - dynamic list of active network hosts on all HotSpot interfaces. Here you can
also find IP address bindings of the one-to-one NAT
• /ip hotspot ip-binding - rules for binding IP addresses to hosts on hotspot interfaces
• /ip hotspot service-port - address translation helpers for the one-to-one NAT
• /ip hotspot walled-garden - Walled Garden rules at HTTP level (DNS names, HTTP request
substrings)
• /ip hotspot walled-garden ip - Walled Garden rules at IP level (IP addresses, IP protocols)
• /ip hotspot user - local HotSpot system users
• /ip hotspot user profile - local HotSpot system users profiles (user groups)
• /ip hotspot active - dynamic list of all authenticated HotSpot users
• /ip hotspot cookie - dynamic list of all valid HTTP cookies
Question&Answer-Based Setup
Command name: /ip hotspot setup
Command Description
address pool of network ( name ) - IP address pool for the HotSpot network
dns name ( text ) - DNS domain name of the HotSpot gateway (will be statically configured on the
local DNS proxy
dns servers ( IP address | IP address ) - DNS servers for HotSpot clients
hotspot interface ( name ) - interface to run HotSpot on
ip address of smtp server ( IP address ; default: 0.0.0.0 ) - IP address of the SMTP server to
redirect SMTP requests (TCP port 25) to
• 0.0.0.0 - no redirect
local address of network ( IP address ; default: 10.5.50.1/24 ) - HotSpot gateway address for the
interface
masquerade network ( yes | no ; default: yes ) - whether to masquerade the HotSpot network
name of local hotspot user ( text ; default: admin ) - username of one automatically created user
passphrase ( text ) - the passphrase of the certificate you are importing
password for the user ( text ) - password for the automatically created user
select certificate ( name | none | import-other-certificate ) - choose SSL certificate from the list of
the imported certificates
• none - do not use SSL
• import-other-certificate - setup the certificates not imported yet, and ask this question again
Page 508 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
To Next Page
Loading...
General