1 ip tcp 74 4328 94.25 %
2 ip gre 3 264 5.74 %
3 ip tcp 22 (ssh) 49 3220 70.12 %
4 ip tcp 23 (telnet) 25 1108 24.12 %
[admin@MikroTik] tool sniffer protocol>
Packet Sniffer Host
Home menu level: /tool sniffer host
Description
The submenu shows the list of hosts that were participating in data excange you've sniffed.
Property Description
address ( read-only: IP address ) - IP address of the host
peek-rate ( read-only: integer/integer ) - the maximum data-rate received/transmitted
rate ( read-only: integer/ integer ) - current data-rate received/transmitted
total ( read-only: integer/ integer ) - total packets received/transmitted
Example
In the following example we'll see the list of hosts:
[admin@MikroTik] tool sniffer host> print
# ADDRESS RATE PEEK-RATE TOTAL
0 10.0.0.4 0bps/0bps 704bps/0bps 264/0
1 10.0.0.144 0bps/0bps 6.24kbps/12.2kbps 1092/2128
2 10.0.0.181 0bps/0bps 12.2kbps/6.24kbps 2994/1598
3 10.0.0.241 0bps/0bps 1.31kbps/4.85kbps 242/866
[admin@MikroTik] tool sniffer host>
Packet Sniffer Connections
Home menu level: /tool sniffer connection
Description
Here you can get a list of the connections that have been watched during the sniffing time.
Property Description
active ( read-only: yes | no ) - if yes the find active connections
bytes ( read-only: integer ) - bytes in the current connection
dst-address ( read-only: IP address ) - destination address
mss ( read-only: integer ) - Maximum Segment Size
resends ( read-only: integer ) - the number of packets resends in the current connection
src-address ( read-only: IP address ) - source address
Page 614 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
To Next Page
Loading...
General