5 159.148.147.196 192.168.0.2 2 136
6 192.168.0.2 159.148.147.196 1 40
7 159.148.172.197 192.168.0.2 835 1192962
[admin@MikroTik] ip accounting snapshot>
Web Access to the Local IP Traffic Accounting Table
Home menu level: /ip accounting web-access
Description
The web page report make it possible to use the standard Unix/Linux tool wget to collect the traffic
data and save it to a file or to use MikroTik shareware Traffic Counter to display the table. If the
web report is enabled and the web page is viewed, the snapshot will be made when connection is
initiated to the web page. The snapshot will be displayed on the web page. TCP protocol, used by
http connections with the wget tool guarantees that none of the traffic data will be lost. The
snapshot image will be made when the connection from wget is initiated. Web browsers or wget
should connect to URL: http://routerIP/accounting/ip.cgi
Property Description
accessible-via-web ( yes | no ; default: no ) - wheather the snapshot is available via web
address ( IP address | netmask ; default: 0.0.0.0 ) - IP address range that is allowed to access the
snapshot
Example
To enable web access from 10.0.0.1 server only:
[admin@MikroTik] ip accounting web-access> set accessible-via-web=yes \
\... address=10.0.0.1/32
[admin@MikroTik] ip accounting web-access> print
accessible-via-web: yes
address: 10.0.0.1/32
[admin@MikroTik] ip accounting web-access>
Page 373 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
To Next Page
Loading...
General