[admin@MikroTik] interface ppp-server> add name=test port=serial1
[admin@MikroTik] interface ppp-server> print
Flags: X - disabled, R - running
0 X name="test" mtu=1500 mru=1500 port=serial1
authentication=mschap2,chap,pap profile=default modem-init=""
ring-count=1 null-modem=no
[admin@MikroTik] interface ppp-server> enable 0
[admin@MikroTik] interface ppp-server> monitor test
status: "waiting for call..."
[admin@MikroTik] interface ppp-server>
PPP Client Setup
Home menu level: /interface ppp-client
Description
The section describes PPP clients configuration routines.
Property Description
port ( name ; default: (unknown) ) - serial port
user ( text ; default: "" ) - P2P user name on the remote server to use for dialout
password ( text ; default: "" ) - P2P user password on the remote server to use for dialout
profile ( name ; default: default ) - local profile to use for dialout
allow ( multiple choice: mschap2, mschap1, chap, pap ; default: mschap2, mschap1, chap, pap ) -
the protocol to allow the client to use for authentication
phone ( integer ; default: "" ) - phone number for dialout
tone-dial ( yes | no ; default: yes ) - defines whether use tone dial or pulse dial
mtu ( integer ; default: 1500 ) - Maximum Transmission Unit. Maximum packet size to be
transmitted
mru ( integer ; default: 1500 ) - Maximum Receive Unit
null-modem ( no | yes ; default: no ) - enable/disable null-modem mode (when enabled, no modem
initialization strings are sent)
modem-init ( text ; default: "" ) - modem initialization strings. You may use "s11=40" to improve
dialing speed
dial-on-demand ( yes | no ; default: no ) - enable/disable dial on demand
add-default-route ( yes | no ; default: no ) - add PPP remote address as a default route
use-peer-dns ( yes | no ; default: no ) - use DNS server settings from the remote server
Notes
Additional client profiles must be configured on the server side for clients to accomplish logon
procedure. For more information see Related Documents section.
PPP client profiles must match at least partially (local-address and values related to encryption
should match) with corresponding remote server values.
Page 231 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
To Next Page
Loading...
General