Cyclades PC300 PCI Adapters
Document revision 1.1 (Fri Mar 05 08:13:30 GMT 2004)
This document applies to MikroTik RouterOS V2.9
Table of Contents
Table of Contents
General Information
Summary
Specifications
Related Documents
Synchronous Interface Configuration
Description
Property Description
Troubleshooting
Description
RSV/V.35 Synchronous Link Applications
Example
General Information
Summary
The MikroTik RouterOS supports the following Cyclades PC300 Adapter hardware:
• RSV/V.35 (RSV models) with 1 or 2 RS-232/V.35 interfaces on standard DB25/M.34
connector, 5Mbps, internal or external clock
• T1/E1 (TE models) with 1 or 2 T1/E1/G.703 interfaces on standard RJ48C connector,
Full/Fractional, internal or external clock
• X.21 (X21 models) with 1 or 2 X.21 on standard DB-15 connector, 8Mbps, internal or external
clock
Specifications
Packages required: synchronous
License required: level4
Home menu level: /interface cyclades
Standards and Technologies: X.21 , X.35 , T1/E1/G.703 , Frame Relay , PPP , Cisco-HDLC
Hardware usage: Not significant
Related Documents
• Package Management
• Device Driver List
• IP Addresses and ARP
Page 176 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
To Next Page
Loading...