M3P
Document revision 0.3.0 (Wed Mar 03 16:07:55 GMT 2004)
This document applies to MikroTik RouterOS V2.9
Table of Contents
Table of Contents
Summary
Specifications
Related Documents
Description
Setup
Description
Property Description
Notes
Example
General Information
Summary
The MikroTik Packet Packer Protocol (M3P) optimizes the data rate usage of links using protocols
that have a high overhead per packet transmitted. The basic purpose of this protocol is to better
enable wireless networks to transport VoIP traffic and other traffic that uses small packet sizes of
around 100 bytes.
M3P features:
• enabled by a per interface setting
• other routers with MikroTik Discovery Protocol enabled will broadcast M3P settings
• significantly increases bandwidth availability over some wireless links by approximately four
times
• offer configuration settings to customize this feature
Specifications
Packages required: system
License required: level1
Home menu level: /ip packing
Standards and Technologies: M3P
Hardware usage: Not significant
Related Documents
• Package Management
• MNDP
Page 214 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
To Next Page
Loading...
General