• No Set support
• No Trap support
Specifications
Packages required: system , ppp (optional)
License required: level1
Home menu level: /snmp
Standards and Technologies: SNMP (RFC 1157)
Hardware usage: Not significant
Related Documents
• Package Management
• IP Addresses and ARP
Additional Documents
• http://www.ietf.org/rfc/rfc1157.txt
• http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/snmp.htm
• http://www.david-guerrero.com/papers/snmp/
SNMP Setup
Home menu level: /snmp
Description
This section shows you how to enable the SNMP agent on MikroTik RouterOS.
Property Description
enabled ( yes | no ) - whether the SNMP service is enabled
contact ( text ; default: "" ) - contact information for the NMS
location ( text ; default: "" ) - location information for the NMS
Example
To enable the service, specifying some info:
[admin@MikroTik] snmp> set contact="admin@riga-2" location="3rd floor" enabled="yes"
[admin@MikroTik] snmp> print
enabled: yes
contact: admin@riga-2
location: 3rd floor
[admin@MikroTik] snmp>
SNMP Communities
Page 403 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
To Next Page
Loading...
General