[admin@MikroTik] ip accounting> print
enabled: yes
account-local-traffic: no
threshold: 256
[admin@MikroTik] ip accounting>
Example
See the uncounted packets:
[admin@MikroTik] ip accounting uncounted> print
packets: 0
bytes: 0
[admin@MikroTik] ip accounting uncounted>
Local IP Traffic Accounting Table
Home menu level: /ip accounting snapshot
Description
When a snapshot is made for data collection, the accounting table is cleared and new IP pairs and
traffic data are added. The more frequently traffic data is collected, the less likelihood that the IP
pairs thereshold limit will be reached.
Property Description
bytes ( read-only: integer ) - total number of bytes, matched by this entry
dst-address ( read-only: IP address ) - destination IP address
dst-user ( read-only: text ) - recipient's name (if aplicable)
packets ( read-only: integer ) - total number of packets, matched by this entry
src-address ( read-only: IP address ) - source IP address
src-user ( read-only: text ) - sender's name (if aplicable)
Notes
Usernames are shown only if the users are connected to the router via a PPP tunnel or are
authenticated by HotSpot.
Before the first snapshot is taken, the table is empty.
Example
To take a new snapshot:
[admin@MikroTik] ip accounting snapshot> take
[admin@MikroTik] ip accounting snapshot> print
# SRC-ADDRESS DST-ADDRESS PACKETS BYTES SRC-USER DST-USER
0 192.168.0.2 159.148.172.197 474 19130
1 192.168.0.2 10.0.0.4 3 120
2 192.168.0.2 192.150.20.254 32 3142
3 192.150.20.254 192.168.0.2 26 2857
4 10.0.0.4 192.168.0.2 2 117
Page 372 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
To Next Page
Loading...
General