MAC Telnet Server
Home menu level: /tool mac-server
Property Description
interface ( name | all ; default: all ) - interface name to which the mac-server clients will connect
• all - all interfaces
Notes
There is an interface list in this submenu level. If you add some interfaces to this list, you allow
MAC telnet to that interface. Disabled (disabled=yes) item means that interface is not allowed to
accept MAC telnet sessions on that interface.
Example
To enable MAC telnet server on ether1 interface only:
[admin@MikroTik] tool mac-server> print
Flags: X - disabled
# INTERFACE
0 all
[admin@MikroTik] tool mac-server> remove 0
[admin@MikroTik] tool mac-server> add interface=ether1 disabled=no
[admin@MikroTik] tool mac-server> print
Flags: X - disabled
# INTERFACE
0 ether1
[admin@MikroTik] tool mac-server>
MAC WinBox Server
Home menu level: /tool mac-server mac-winbox
Property Description
interface ( name | all ; default: all ) - interface name to which it is alowed to connect with Winbox
using MAC-based protocol
• all - all interfaces
Notes
There is an interface list in this submenu level. If you add some interfaces to this list, you allow
MAC Winbox to that interface. Disabled (disabled=yes) item means that interface is not allowed to
accept MAC Winbox sessions on that interface.
Example
To enable MAC Winbox server on ether1 interface only:
[admin@MikroTik] tool mac-server mac-winbox> print
Page 62 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
To Next Page
Loading...