limit-bytes-out ( read-only: integer ) - maximal amount of bytes the router is allowed to send to
the client
login-by ( multiple choice, read-only: cookie | http-chap | http-pap | https | mac | trial ) -
authentication method used by user
mac-address ( read-only: MAC address ) - actual MAC address of the user
packets-in ( read-only: integer ) - how many packets did the router receive from the client
packets-out ( read-only: integer ) - how many packets did the router send to the client
radius ( read-only: yes | no ) - whether the user was authenticated via RADIUS
server ( read-only: name ) - the particular server the used is logged on at.
session-time-left ( read-only: time ) - the exact value of session-time-left that applies to this user.
This property shows how long should the user stay logged-in (see uptime) for it to be logged off
automatically
uptime ( read-only: time ) - current session time of the user (i.e., how long has the user been
logged in)
user ( read-only: name ) - name of the user
Example
To get the list of active users:
[admin@MikroTik] ip hotspot active> print
Flags: R - radius, B - blocked
# USER ADDRESS UPTIME SESSION-TIMEOUT IDLE-TIMEOUT
0 ex 10.0.0.144 4m17s 55m43s
[admin@MikroTik] ip hotspot active>
Page 369 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
To Next Page
Loading...