use-radius ( yes | no ; default: no ) - enable user authentication via RADIUS
Notes
RADIUS user database is consulted only if the required username is not found in local user
database.
Example
To enable RADIUS AAA:
[admin@MikroTik] ppp aaa> set use-radius=yes
[admin@MikroTik] ppp aaa> print
use-radius: yes
accounting: yes
interim-update: 0s
[admin@MikroTik] ppp aaa>
Page 380 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
To Next Page
Loading...
General