Access-Request
• Service-Type - always is "Framed" (only for PPPs)
• Framed-Protocol - always is "PPP" (only for PPPs)
• NAS-Identifier - router identity
• NAS-IP-Address - IP address of the router itself
• NAS-Port - unique session ID
• Acct-Session-Id - unique session ID
• NAS-Port-Type - async PPP - "Async"; PPTP and L2TP - "Virtual"; PPPoE - "Ethernet";
ISDN - "ISDN Sync"; HotSpot - "Ethernet | Cable | Wireless-802.11" (according to the value of
nas-port-type parameter in /ip hotspot profile
• Calling-Station-Id - PPPoE and HotSpot- client MAC address in capital letters; PPTP and
L2TP - client public IP address; ISDN - client MSN
• Called-Station-Id - PPPoE - service name; PPTP and L2TP - server IP address; ISDN -
interface MSN; HotSpot - name of the HotSpot server
• NAS-Port-Id - async PPP - serial port name; PPPoE - ethernet interface name on which server
is running; HotSpot - name of the physical HotSpot interface (if bridged, the bridge port name
is showed here); not present for ISDN, PPTP and L2TP
• Framed-IP-Address - IP address of HotSpot client after Universal Client translation
• Mikrotik-Host-IP - IP address of HotSpot client before Universal Client translation (the
original IP address of the client)
• User-Name - client login name
• MS-CHAP-Domain - User domain, if present
• Mikrotik-Realm - If it is set in /radius menu, it is included in every RADIUS request as
Mikrotik-Realm attribute. If it is not set, the same value is sent as in MS-CHAP-Domain
attribute (if MS-CHAP-Domain is missing, Realm is not included neither)
• WISPr-Location-ID - text string specified in radius-location-id property of the HotSpot server
• WISPr-Location-Name - text string specified in radius-location-name property of the HotSpot
server
• WISPr-Logoff-URL - full link to the login page (for example, http://10.48.0.1/lv/logout)
• User-Password - encrypted password (used with PAP authentication)
• CHAP-Password, CHAP-Challenge - encrypted password and challenge (used with CHAP
authentication)
• MS-CHAP-Response, MS-CHAP-Challenge - encrypted password and challenge (used with
MS-CHAPv1 authentication)
• MS-CHAP2-Response, MS-CHAP-Challenge - encrypted password and challenge (used with
MS-CHAPv2 authentication)
Depending on authentication methods (NOTE: HotSpot uses CHAP by default and may use also
PAP if unencrypted passwords are enabled, it can not use MSCHAP):
Access-Accept
Page 385 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
To Next Page
Loading...
General