If local time is before GMT time, time-zone value will be negative. For example, if GMT is
18:00:00, but correct local time is 15:00:00, time-zone has to be set to -3 hours:
[admin@MikroTik] system clock> set time-zone=-3
[admin@MikroTik] system clock> print
time: sep/24/2004 08:13:28
time-zone: -03:00
[admin@MikroTik] system clock>
Page 584 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
To Next Page
Loading...