4. Set the dedicated computer to boot from floppy device, insert the disk #1 and boot the
computer. When it will process the first floppy, it will ask for the second, until all floppies are
processed.
Note: after the installation you will have to enter the Software key. See this manual how to do it.
Page 48 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
To Next Page
Loading...