MIMAKI JFX-1631/1615 - Regular Maintenance for White Ink

4-19
4
Maintenance
Regular maintenance for white ink
White ink is easier precipitate than other inks.
• In case without printing more than one week, white ink may cause precipitate in ink cartridge or inside of the
device.
• When the ink is precipitated, nozzle clogging occurs and normal drawing can not be obtained.
• Make sure to perform periodical maintenance to avoid precipitation and to keep white ink good condition.
1
Press the key in the local mode.
2
Select the [MAINTENANCE] with pressing the or
key, and press the key.
3
Select the [WHITE MANT] with pressing the or
key ,and press the key.
4
Select executing white maintenance or not for each
head, and press the key.
(1) Select the head with or key.
(2) Select executing white maintenance or not with or key.
• When "not executing maintenance" is selected, “ * ” is displayed.
5
Pull out the white ink cartridge form the ink station.
6
Press the key.
• White ink discharge operation starts.
• Be sure to perform the following operation at least once a week.
• Use the specified ink cartridge.
FUNCT I ON
VIEW <ENT>
FUNCTION
MA I NTENANCE
STAT I ON <en t >
ENTER
WH I T E M A N T
[--------- WWWW----]
ENTER
WH I T E M A N T
[--------- WW**----]
ENTER
WH I T E M A I N
REMOVE CARTR I DGE
EM I SS I ON
PLEASE WA I T
ENTER