MIMAKI JFX-1631/1615 - Setting of Interval Cleaning

Cleaning nozzle face automatically
4-11
4
Maintenance
Setting of Interval Cleaning
When the set number of printing times is completed, head cleaning is performed automatically.
1
Select the “PERIODIC MAINTENANCE MODE” of the maintenance menu.
(1)Press the key in the local mode.
(2)Select the [MAINTENANCE] by pressing the or key, and press the key.
(3)Select the [PERIODIC MAINTE] by pressing the or key.
(4)Press the key.
2
Select the [CLEANING] by pressing the or
key.
3
Press the key
4
Select the cleaning type by pressing the or
key.
• Setting value : normal, hard
5
Press the key
6
Set the number of printing times (OFF, 1~100) by
pressing the or key.
• If it is set to “OFF”, the periodical cleaning is not performed.
7
Press the key
8
Select the head and set execution/non-execution of
cleaning.
(1) Select the head with or keys.
(2) Select execution/non-execution of the cleaning
with or keys.
Execute Cleaning : A color of an ink cartridge being set is displayed.
Not Execute Cleaning : “ - ” is displayed
9
Press the key.
10
Press the key several times to end the setting.
FUNCTION
ENTER
ENTER
PERIODIC MAINTE
CLEAN I NG <en t >
INT.CLEANING
TYPE : no rma l
ENTER
INT.CLEANING
TYPE : ha r d
INT.CLEANING
PR I NT COUNT = 1 0
ENTER
INT.CLEANING
PR I NT COUNT = 1 5
MA I NTENANCE
INT.CLEANING <ent>
ENTER
INT.WIPING
[ MMMMCCCCYY
Y Y KKKK ]
INT.WIPING
[ MMMMCCCCYY
- - KKKK ]
ENTER
END