MIMAKI JFX-1631/1615 - Other Useful Functions; Data Clear; Displaying Information of this Device

3-7
3
Useful Function
Other useful functions
Data clear
Erase the data not required for this device with the following operation.
1
Press the key in the local mode.
2
Press the key.
• The data is erased.
Displaying information of this device
1
Make sure that the local mode is displayed.
2
The information is displayed sequentially by pressing the
key.
• The following information are displayed.
Remaining amount of ink / Main FW version/ Command information / Sub FW version / UV LED
irradiation time / Pressure value / Subtank condition
• The left UV LED irradiation time is displayed on the left, and the right UV LED irradiation time is displayed
on the right.
3
Press the key to return to the local mode
• Information on your machine type can be confirmed in P.3-15"Displaying machine information of this
device".
• As for the details on irradiation time of the UV LED, see P.4-35"Displaying the irradiation time of the UV
LED unit".
DATA CLEAR
<ENT>
DATACLEAR
** DATA CLEAR **
ENTER
<LOCAL>
2.5mm
ENTER
Main FW version/ Command information
UV LED irradiation time
Subtank condition
JFX- 16* * V1 . 00
MR L - I I B V 1 . 2 0
<LOCAL> USED T IME
120 , 120 , 120 , 120
<LOCAL> Sub . Tank
FFFFFFFF FFFFFFFF
Remaining amount of ink
Main FW / Sub FW version
Pressure value
<LOCAL> KCMYcmW-
REMAIN 9999999 -
JFX-16* * V1 . 00
SUB FW V1 . 0 0
<LOCAL>
NEGA . PRESS 2 . 5 kPa
<LOCAL>
2.5mm
ENTER