MIMAKI JFX-1631/1615 - For Setting Media Correctly

3-18
For setting media correctly
Guide holes for inserting commercial screws are placed on
each end (3 sides) of the table.
• Fix a guide for placing the media on the correct position
using those holes.
Arrangement of guide holes
When you prepare the guide for setting the media, please use the following sizes as reference.
• Select a material for the guide which is not thicker than the media.
• To the guide hole, you can insert a screw of M5.
guide hole
100
25
22
100
65
72
15
7
(Unit of numerical value: mm)