MIMAKI JFX-1631/1615 - Prevent the Nozzle Clogging of Special Color

4-16
Prevent the nozzle clogging of special color
To prevent the head nozzle clog, this unit performs refresh while printer is turned on. However the characteristic
of white ink is different from other inks, therefore nozzle out occurs even performing the refresh.
Change the head refresh operation, where white ink is installed, so as to suitable for the white ink. This will
prevent the nozzle out.
1
Press the key in the local mode.
2
Select the [MAINTENANCE] by pressing
the or key.
v
3
Press the key.
4
Select the [SP.REFRESH] by pressing the or
key.
5
Press the key.
6
Set the special refresh by pressing the , ,
or key.
(1) Select the head with the key.
(2) Select execution of special refresh with key.
• Select the ink filling for all the heads.
•Fill ：Displays the set ink cartridge.
• Not fill ：Displays “ * ”.
7
Press the key.
8
Press the key several times to end the setting.
• For the head on which special refresh was performed in the Step 6, refresh operation is performed with
the condition set here, not with the refreshing operation set in “REFRESH-WITING”.
FUNCT I ON
VIEW <ENT>
FUNCTION
FUNCT I ON
MA I NTENANCE < ENT >
MA I NTENANCE
STAT I ON <en t >
ENTER
MA I NTENANCE
SP . REFRESH <e n t >
SPEC I AL REFRESH
[YYMMCCKK KKCCMMYY]
ENTER
SPEC I AL REFRESH
[YYMMC
CKK KKCCMMYY ]
SPEC I AL REFRESH
[YYMMC
* KK KKCCMMYY ]
ENTER
END