Execution of head cleaning
2-10
Cleaning automatically when turning the power on
Cleaning can be set to be executed automatically when turning the power on and the hot water is ready.
1
Press the key in the local mode.
2
Select [power on] with or keys and press
key.
3
Select the head and execution / non-execution of the
head cleaning when turning the power on.
(1) Select the head with or keys.
(2) Select execution/non-execution of the head cleaning
with or keys.
• Select execution of cleaning for every head.
Execute Cleaning : A color of an ink cartridge being set is displayed.
Not Execute Cleaning : “ - ” is displayed
4
Press the key.
• When the setting is completed, a mode is returned to the local mode.
To Next Page
Loading...
