MIMAKI JFX-1631/1615 - Changing Origin with FUNCTION Menu

Changing origin
3-3
3
Useful Function
Changing origin with FUNCTION menu
To precisely set the origin of coordinates, set its X- and Y- coordinates from the FUNCTION menu. This setting
value becomes the origin position (0, 0).
1
Press the key in the local mode.
2
Select the [ORIGIN] by pressing the or key.
3
Press the key twice.
• X-axis offset value setting screen is displayed.
4
Input value by pressing the or keys.
• Setting the origin position of X-axis.
• The value in the parentheses indicates the distance from the origin
to the maximum effective area.
5
Press the key.
6
Select the [Y OFFSET] by pressing the or
keys.
7
Press the key.
8
Input value by pressing the or keys.
• Setting the origin position of Y-axis.
9
Press the key.
10
Press the key several times to end the setting.
• The set value is not cleared by cutting the power.
FUNCT I ON
VIEW <ENT>
FUNCTION
FUNCT I ON
OR I G I N < ENT >
ORIGIN 3100MM
XOFFS : 0MM
ENTER
ORIGIN 3090MM
XOFFS : 10MM
OR I G I N
SELCT : X OFFSE
ENTER
OR I G I N
SELCT : Y OFFSE
ORIGIN 1602MM
YOFFS : 0MM
ENTER
ORIGIN 1592MM
YOFFS : 10MM
OR I G I N
SELCT : X OFFSE
ENTER
END