MIMAKI JFX-1631/1615 - Basic unit specifications

6-2
Specifications
Basic unit specifications
Item JFX-1631/JFX-1631plus JFX-1615/JFX-1615plus
Drawing
head
Method
On demand piezo-head
Specification
8-heads
Resolution
300 x 300 dpi, 600 x 600 dpi, 1200 x 1200 dpi
Drawing
mode
600 x 600 dpi
4 pass (standard)/8pass single/bi (H.S.)
1200 x 1200 dpi
4 pass single/bi-direction (standard)/
8 pass/16 pass single/bi (H.S.)
Usable ink
Genuine UV curing ink
Total 4 color: Bk, C, M, Y
Ink supply
Supplies ink through a tube from ink cartridge
Remaining ink display function
Ink end detection function
Ink capacity
600cc (When four colors are set: four for each color, when six colors
are set: two for each color)
Usable
media
Size
1694 x 3194 mm 1694 x 1592 mm
Thickness
Less than 50mm
Max. drawing range
W 1602 x L 3100 mm W 1602 x L 1500 mm
Distance
accuracy
Absolute accuracy
± 0.1 mm
Reproducibility
± 0.2 mm
Perpendicularity
± 0.5 mm/500mm
Head gap adjustment
Automatic head adjustment enabled.
Media absorption
Adsorptive immobilization by the vacuum unit
*1
*1. The vacuum unit is an option.
UV unit
UV LED device x 4 (equipped with the carriage)
UV power supply built in the main unit
Waste ink tray
Tray type (800cc/, with tank full sensor)
Interface
USB2.0 compliance
Command
MRL-II B
<ESC/P Level 2 base, MIMAKI original command>
Noise
Stand-by
Less than 55dB
(FAST-A, 1m in all direction)
Operation continuous
noise
Less than 65 dB
Operation
discontinuity noise
Less than 75dB
Safety standard
UL, FCC-Class A, CE Marking, CB Report
Ink safety
MSDS
Power specification
Single phase AC 200 to 240V 8A
Power consumption
Less than 2.0kVA
Environment
Available temperature
15 to 30 °C
Humidity
35 to 65%Rh (No condensation)
Guaranteed
temperature
18 to 25 °C
Temperature change
± 10 °C or less
Dust
Equivalent to normal office level
Weight
Approx. 1600 kg Approx. 1300 kg
Outside dimensions
4300 (W) x 4200 (D) x 1600
(H) mm
4300 (W) x 2700 (D) x 1600
(H) mm