MIMAKI JFX-1631/1615 - Registering the thickness of the media

3-4
Registering the thickness of the media
Register the thickness of loading media.
There are three types of registering; “Register the thickness of the media manually”, “Adjust the gap with the
or keys”, and “Measuring the thickness of the media automatically”.
Register the thickness of the media manually
1
Press the key in the local mode.
2
Select the [HEAD HEIGHT] by pressing the or
key.
3
Press the key twice.
4
Press the or key to enter the thickness of
loading media.
• Set value : 0.0 to 50.0mm
5
Press the key.
6
Press the key to end the setting.
Adjust head gap with the or keys
1
Press the or key.
2
Adjust with pressing the or key.
3
Press the key.
UP
DOWN
FUNCT I ON
VIEW <ENT>
FUNCTION
FUNCT I ON
HEAD HE I GHT <ENT>
MEDIA THICKNESS
2.5 mm
ENTER
MEDIA THICKNESS
10 . 5 mm
FUNCT I ON
HEAD HE I GHT <ENT>
ENTER
END
UP
DOWN
OR I G I N SE T UP
ZHEIGHT=45.0
UP
DOWN
OR I G I N SE T UP
** Z HEIGHT **
UP
DOWN
OR I G I N SE T UP
HEAD GAP = 1 . 2
ENTER