3-21
3
Useful Function
Use the Post Cure Unit
Note when using Post Cure Unit
When the Post Cure Unit is used, as the depth of the Y bar increases by the Post Cure Unit, the movable area of
the Y bar narrows compared to that of the JFX-1631/1615, and therefore, the drawing range also narrows.
• When you use JFX-1631/1615, the Post Cure Unit is an option.
• Compared with JFX-1631/ 1615, the Y bar cannot move in the gray part of the figure above.
• Set the media on the white part of the figure above.
• You can enlarge the drawing range and the UV irradiation area up to 3100mm (for JFX-1615plus, up to
1500mm).
• To enlarge the drawing range and the UV irradiation area, setting and the work are required. Refer to
P.3-28 “Enlarge the irradiation area of the post cure”.
To Next Page
Loading...
